Floplast Xtraflo RKX1B 170mm Fascia Bracket Black

FLOPLAST Xtraflo RKX1B 170mm Fascia Bracket Black

Fascia brackets, also known as gutter brackets or gutter clips, are the main supports for the gutter system.

The bracket is screwed to the fascia board using two countersunk screws (we recommend 5 x 30mm). The gutter is then clipped in place by first sliding the back edge in under the rear clip and pulling gently down on the front edge to clip the gutter into position.

Due to the potentially heavy weight of rain or snow carried in this gutter the brackets should be spaced at no more than 600mm centres - that means that you should allow 7 brackets for each 4m length

This Industrial gutter connects to 110mm round downpipe.

To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.

FloPlast recommend the use of lubricant on all gutter seals for ease of fitting and improved performance.

Ideal for commercial, industrial and agricultural buildings. Suitable for any building with a large roof area.

The vortex outlet design encourages the `swirling effect` of the water for greater water flow down the pipe.

Complete with wide rubber seals which allows for optimum performance in all conditions.

Innovative and clean modern appearance.

Semi-Elliptical profile.

High flow capacity – 11.8 litres/second, outlet in centre, 1.350 fall

Connects to 110mm pipe and fittings.

System is covered by a BSI Kitemark – no. KM501316.

Silicone lubricant must be used on all installations (SL400).