Floplast Xtraflo ROX1B 170mm Running Outlet Black

FLOPLAST Xtraflo ROX1B 170mm Running Outlet Black

A Running Outlet is the fitting which connects the guttering to the downpipe.

Essentially a tee piece, running outlets can be used at either the centre or the end of the run of gutter. If the outlet is installed at the end then a short piece of gutter with an external stopend attached is used to extend the gutter past the end of the brickwork to catch any rainfall from the overhanging tiles.

The outlet has moulded screwholes to enable it to be fixed back to the fascia board. 

To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.

FloPlast recommend the use of lubricant on all gutter seals for ease of fitting and improved performance.

Ideal for commercial, industrial and agricultural buildings. Suitable for any building with a large roof area.

The vortex outlet design encourages the `swirling effect` of the water for greater water flow down the pipe.

Complete with wide rubber seals which allows for optimum performance in all conditions.

Innovative and clean modern appearance.

Semi-Elliptical profile.

High flow capacity – 11.8 litres/second, outlet in centre, 1.350 fall

Connects to 110mm pipe and fittings.

System is covered by a BSI Kitemark – no. KM501316.

Silicone lubricant must be used on all installations (SL400).