Floplast Xtraflo REX1W 170mm Ext Stopend White

FLOPLAST Xtraflo REX1W 170mm Ext Stopend White

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.

They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.

To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.

FloPlast recommend the use of lubricant on all gutter seals for ease of fitting and improved performance.

Ideal for commercial, industrial and agricultural buildings. Suitable for any building with a large roof area.

The vortex outlet design encourages the `swirling effect` of the water for greater water flow down the pipe.

Complete with wide rubber seals which allows for optimum performance in all conditions.

Innovative and clean modern appearance.

Semi-Elliptical profile.

High flow capacity – 11.8 litres/second, outlet in centre, 1.350 fall

Connects to 110mm pipe and fittings.

System is covered by a BSI Kitemark – no. KM501316.

Silicone lubricant must be used on all installations (SL400).