Floplast Xtraflo RAX1B 170mm 90D Angle Black

FLOPLAST Xtraflo RAX1B 170mm 90D Angle Black

Ideal for commercial, industrial and agricultural buildings.  90 Degree Gutter Angles are used to turn the gutter around the corner of a building. As the system is symmetrical, both internal and external corners use the same fitting - there is no difference.

You should always support a gutter angle by positioning a fascia bracket within 150mm on both sides of the angle. This will prevent the fitting from sagging when it is weighed down by water or snow.

 FloPlast recommend the use of lubricant on all gutter seals for ease of fitting and improved performance.

Ideal for commercial, industrial and agricultural buildings. Suitable for any building with a large roof area.

The vortex outlet design encourages the `swirling effect` of the water for greater water flow down the pipe.

Complete with wide rubber seals which allows for optimum performance in all conditions.

Innovative and clean modern appearance.

Semi-Elliptical profile.

High flow capacity – 11.8 litres/second, outlet in centre, 1.350 fall

Connects to 110mm pipe and fittings.

System is covered by a BSI Kitemark – no. KM501316.

Silicone lubricant must be used on all installations (SL400).